SOLDERLESS COPPER AND BRASS BONDING - ATMOSFIX
This resin makes it easy to connect copper pipes and brass fittings.
Use as a simple glue.
Effective in 3 minutes.
Residue-free, resistant to high pressure and heat.
DESCRIPTION
This resin makes it easy to connect copper pipes and brass fittings.
Use as a simple glue.
Effective in 3 minutes.
Residue-free, resistant to high pressure and heat.
Use as a simple glue.
Effective in 3 minutes.
Residue-free, resistant to high pressure and heat.
+ PRODUCT
Does not require the use of any device
Can be used without special know-how
Totally clean
High speed of implementation
Very economical product
Can be used without special know-how
Totally clean
High speed of implementation
Very economical product
INSTRUCTIONS FOR USE
1- Wear gloves to prevent the product from coming in contact with the skin.
2- Sand, clean and degrease the fittings to be soldered.
3- Pull on the white cap to open the boKle
4- Pull the nozzle ring upward to allow the product to flow
5- Coat the male end of the pipe to be connected.
6- Avoid excess product.
7- Fit the two parts to be connected and make circular movements to spread the product over the entire surface.
8- Wipe off excess product with a cloth.
9- Let the product dry for 3 to 5 minutes without moving it.
10- Push the nozzle ring downward
11- Put the cap securely on the bottle after use.
2- Sand, clean and degrease the fittings to be soldered.
3- Pull on the white cap to open the boKle
4- Pull the nozzle ring upward to allow the product to flow
5- Coat the male end of the pipe to be connected.
6- Avoid excess product.
7- Fit the two parts to be connected and make circular movements to spread the product over the entire surface.
8- Wipe off excess product with a cloth.
9- Let the product dry for 3 to 5 minutes without moving it.
10- Push the nozzle ring downward
11- Put the cap securely on the bottle after use.
PARTNERS
Our products are available at stockists
