Plugged sinks, washbowls and bathtubs:
1 – Fill the sink, washbowl or bathtub with approximately 10 cm of water to submerge the blue end of the cartridge. 2 – Shake the cartridge. 3 – Plug the overflow outlets with a rag or sponge and hold them firmly in place. 4 – Place the blue end on the plughole and hold the aerosol down firmly for one second. Repeat the operation if necessary.

Toilets:
1 – Position the plunger with the cone facing down. 2 – Position the plunger in the toilet such that the blue end is entirely immersed and then proceed as above.

Shower trays and floor drains:
1 – Position the plunger with the flat side facing down. 2 – Position the plunger on the plughole and fill the blue end with water through its neck. 3 – Then proceed as previously.

Note: If the sanitary drainage is still plugged after three tries, see your plumber for more information. Once your sanitary facilities are unplugged, we recommend maintaining them periodically with ATMOSBIO DRAIN CLEANER to prevent the formation of new blockages.
Warning: do not use after previous use of drain cleaners such as sulphuric acid or caustic soda: projection hazard.

A simple pressure = one use
Safe for use on all pipes in a good state of repair
Up to 15 applications
Lemon scent
Adapts to all types of sanitary facilities thanks to its adapter (for the kit)