This product must be stored and handled at a minimum temperature of 20°C.
1-If possible, turn off the water supply or isolate the damaged pipe.
2-The use of gloves is recommended.
3-Sand, clean, degrease the surface.
4-Cut 2 pieces alongside the tubes in order to have the same amount of resin and hardener. Extract the products from the cut-off tubes. Close the tubes with plugs un5l next use.
5-Knead together both products until colour is uniform and homogeneous.
6-Apply directly on the surface pressing firmly. Press well on the sides. Roll it into a rope for cracks or make a disk shape for holes.

Dry to the touch aCer 1H30. Wait at least this long.